豐羅E-Solder 3022雙組分常溫固化銀膠

Typical applications of E-Solder 3022 are lead terminations, printed circuits and shielding on bases which will not withstand the elevated temperatures required for fired-on coatings or solders. E-Solder 3022 is an epoxy silver paste recommended for applications requiring low electrical resistance and good adhesive properties. E-Solder 3022 requires the addition of Hardener No. 18 to harden and cure. E-Solder 3022 may be cured at room temperature, however the application of heat will accelerate and shorten the cure time

常溫固化銀膠

E-Solder 3022 的典型應用是引線端接、印刷電路和底座上的屏蔽，它們不能承受燒制涂層或焊料所需的高溫。E-Solder 3022 是一種環氧銀漿，推薦用于需要低電阻和良好粘合性能的應用。E-Solder 3022 需要添加 18 號硬化劑來硬化和固化。E-Solder 3022 可在室溫下固化，但加熱會加速并縮短固化時間.

以上如有需要請致電13922125860（微信同步）